ORGAUTOMATECH Midi2Org_32
Here are the features of this all new midi board I designed , made and directly distribute:
-
32 outputs, 35 volt , 500 mA max
-
size: Only 100 * 86 mm: can fit in any instrument, even the smallest..
- all ouputs are clearly marked on the board
-
Midi channel can be changed directly on the card by push button and LED, no need of any computer. Useful "on stage" to play together with friends.
-
Responds to note-on, note-off, all sound off (CC120), all note off (CC123)
-
Considers note-on with velocity 0 as note-off
-
Supports MIDI running status
-
Easy mapping of outputs by sending a midi file (with Midilector) or with the freeware "Parametor"
-
ULN2803 chips are not soldered on the board, In case of accident (short in a solenoid for exemple.....) one can exchange them very easely
-
Protection against bad polarity
- New: for safety, there is now a limitation of simultaneous notes playing, for each ULN group and for the entire board. That can be set very easily by the user himself.
-
Compatible with every midifiles player in respect to MIDI standard
-
The MIDI OUT socket acts as a MIDI THRU. That means every messages in goes out by MIDI OUT except active sensing messages
-
Solenoid test with just a button on start
-
By pressing any of the buttons, all the playing notes are stopped. This could be important if your sequencer has a little trouble or if the midi lead is un-plugged while playing.
- On demand, one or more outputs can be programmed to respond to sustain or another control change of your choice
- All other special programmations on demand
Complete features and user manual by clicking here:
I want to know more about this product!
For any question please, feel free to contact me : chris@orgautomatech.fr
Now availlable: SD card midi file reader
A good example of wiring
ORGAUTOMATECH
Christian Blanchard
113 rue Champommier
79000 NIORT
FRANCE
tel 33 9 63 45 61 45
N° siret 399 479 138 00022